Waste Recycling Sludge
Drying Facility Building

12,800 sq ft Tension Fabric Sludge Drying Facility
Loveland, Colorado

Project Profile

The Rundown

The Legacy Building Solutions team designed and constructed this custom 12,800 sq ft tension fabric Sludge Drying Facility building in Loveland, Colorado. Our team of designers, developers and builders creates unique, custom fabric building solutions for a wide variety of uses.

Customer Success

“It was a priority to get the new building operating quickly so we could continue our programming. They were totally committed to doing whatever was necessary to support our project.”

Steve Henry | OKC Tennis Center

“Legacy Building Solutions has given Solar Ship more than just a state-of-the-art hangar and assembly building. Through our close collaboration, their design incorporates a self-reliant photovoltaic power package that sits above the fabric roof, allowing our building operations to be entirely off-grid. In addition, Legacy’s foundation design allowed us to re-use an existing concrete pad, saving us time and money during construction. These innovations were part of our top-level requirements, and delivering on them really sets Legacy apart from the traditional building segment.”

Lewis Reford | Solar Ship

Feature Details

  • Building size: 80 feet x 160 feet
  • 20-foot x 20-foot overhead door and one walk/man door
  • Custom designed 15-foot straight leg height to accommodate equipment clearances
  • Soffit ventilation and 4 endwall mesh vents
  • Building and modified concrete foundation were designed and stamped by Legacy, to be integrated with a partially completed foundation
  • Hot dip galvanized frames
  • 30 lb. snow load, 95 mph wind, low hazard use
  • Building was delivered and installed on time
  • Building use: Sludge Drying Facility

Request Information

Learn more about our extensive capabilities by filling out our form!

Request Information

Get In Touch